Getriebebeine und Halterungen

Gearleg SE30/40-140

Benetau montert "Se50 hus"

Item code: SM152675

Gearleg SE30/40-140

Leitfaden für die Navigation durch die Ersatzteile

Nachstehend sehen Sie die oberste Ebene der Ihnen zur Verfügung stehenden Ersatzteilgruppen. Wenn Sie eine Komponente innerhalb der dargestellten Baugruppe wünschen, klicken Sie auf das Namensschild unter dem Bild, um zu einer detaillierten Ersatzteilliste für diese Baugruppe zu gelangen. Wenn keine zusätzlichen Ersatzteile verfügbar sind, bedeutet dies, dass die aktuelle Baugruppe aufgrund von Service- oder Installationsanforderungen als Ganzes gekauft werden muss.

+
-
SM152675_complete_gearleg_SE30-40_OST_2.png
PHOTO NOT AVAILABLE
1

Drive pin

Quantity:
141258 - ISO 8734 - 4 x 20 - A
PHOTO NOT AVAILABLE
2

Bolt

Quantity:
141259 - DIN 931-1 - M8 x 40
 
3

Gasket for gearleg SE50

Item code: 141261
Quantity:
Go to product page
5,12 €
 
4 / 5

Anode kit, aluminium

Item code: 3 1180 A
Quantity:
Go to product page
9,75 €
PHOTO NOT AVAILABLE
6

Lock nut

Quantity:
3 1250 - DIN 985 - M8x1,25
PHOTO NOT AVAILABLE
7

Washer

Quantity:
208125 - DIN 125 - A 8,4
PHOTO NOT AVAILABLE
8

Propeller

Item code: SM150937
Quantity:
Go to product page
65,00 €

Anode Aluminium, SE30/40/50

Below is a sub-level assembly of spare part groupings. If no additional spare parts are available, it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
Anode_kit_3_1180_A_IZuwlYl.svg
PHOTO NOT AVAILABLE
1

Anode aluminium

Quantity: 1
--
PHOTO NOT AVAILABLE
2

Bolt

Quantity: 1
DIN 912 - M5 x 12 (A4)

Disclaimer

Sleipner warranties the original spare parts supplied only. The installer alone has responsibility for the installation of the spare parts. Do not attempt to fit replacement parts unless you are competent. If the spare part is fitted incorrectly, Sleipner Group will not be liable for any damage resulting.

The information given in the document was correct at the time it was published. However, Sleipner Group cannot accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Consequently, Sleipner Group cannot accept liability for any possible differences between product and document.